Explore. Understand.
Stay ahead.

In the Linux kernel, the following vulnerability has been resolved: nfc: port100: reject frames whose declared length exceeds the received data port100_recv_response() passes the URB transfer buffer to port100_rx_frame_is_valid(), which checksums le16_to_cpu(frame->datalen) bytes of frame->data. datalen is a 16-bit field supplied by the device and is never checked against the number of bytes actually received (urb->actual_length), so a device reporting a datalen larger than the received frame makes port100_data_c…

In the Linux kernel, the following vulnerability has been resolved: nfc: trf7970a: power down on startup RX gain failure trf7970a_startup() powers up the device before applying the optional RX gain reduction. If the register read or write fails, it returns without undoing that power-up. Probe's unwind only drops the separate regulator references acquired by probe, leaving the additional VIN enable from startup unbalanced. The system resume caller also has no power-down on this error. Call trf7970a_power_down() b…

In the Linux kernel, the following vulnerability has been resolved: scsi: libiscsi_tcp: Check the data direction of a Data-In PDU The Data-In branch of iscsi_tcp_hdr_dissect() resolves the ITT to a task and copies the PDU's data segment into that command's scatterlist without asking whether the command was reading. iscsi_tcp_r2t_rsp() in the same file does ask, and rejects an R2T for a command that is not DMA_TO_DEVICE. A target that answers a WRITE command's ITT with a Data-In therefore has the initiator write …

In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Keep internal commands dispatchable during error handling Commit 08b12cda6c44 ("scsi: ufs: core: Switch to scsi_get_internal_cmd()") switched UFS internal commands to allocate requests on hba->host->pseudo_sdev->request_queue, which shares the host tagset with regular LUNs. During error recovery, ufshcd_err_handling_prepare() calls blk_mq_quiesce_tagset(&hba->host->tag_set), marking all queues in the tagset as quiesced, includin…

In the Linux kernel, the following vulnerability has been resolved: perf/core: Fix NULL pmu_ctx passed to pmu->sched_task() perf_pmu_sched_task() returns early when cpuctx->task_ctx is set, and cpc->task_epc is only non-NULL while a task context is scheduled in on this CPU. __perf_pmu_sched_task() therefore always passes NULL: Unable to handle kernel NULL pointer dereference at virtual address 00 pc : armv8pmu_sched_task+0x14/0x50 Call trace: armv8pmu_sched_task+0x14/0x50 (P) perf_pmu_sched_task+0xac…

In the Linux kernel, the following vulnerability has been resolved: s390/cio: Fix NULL pointer dereference in ccw_device_get_util_str() The channel path registry entry associated with a CHPID may be removed while the subchannel's PMCW still references that CHPID. In this case, chpid_to_chp() can return NULL, leading to a NULL pointer dereference. Add the missing NULL check before dereferencing the returned pointer.

In the Linux kernel, the following vulnerability has been resolved: s390/cmf: Fix virtual vs physical address confusion The measurement block address is an absolute address. Define the associated schib_config and schib fields as dma64_t to enable automatic detection of incorrect assignments. Also add the missing virt_to_dma64() translation. Without this fix, a wrong address will be used by firmware when storing extended format channel measurement data on kernels built with CONFIG_RANDOMIZE_IDENTITY_BASE=y.

In the Linux kernel, the following vulnerability has been resolved: s390/pci: Fix missing device lock in zpci_report_status() When pdev is non-NULL, zpci_report_status() accesses the device's driver. To get a consistent state matching the recovery, the device lock needs to be held. Do so by expanding the existing device lock critical section. The lock only needs to be held when the pdev is non-NULL, so extract the pdev-specific reporting into a helper function which also adds a lockdep assertion to detect calls …

In the Linux kernel, the following vulnerability has been resolved: s390/vfio-ap: fix KVM GISC and page leak when queue removed from host config Three related problems exist in the handling of KVM interrupt and page resources when a queue is removed from the host's AP configuration while assigned to a mediated device (mdev). Problem 1: ~~~~~~~~~ AP_RESPONSE_Q_NOT_AVAIL not handled in vfio_ap_mdev_reset_queue() When the AP bus removes a queue device whose adapter or domain has been removed from the host's AP con…

In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Free have_run_cpus during VM destruction even if VM is no longer SEV Unconditionally free SEV's "have run CPUs" cpumask in the VM destroy path, i.e. even for what appear to be non-SEV VMs, as an SEV VM becomes a non-SEV VM if its state is intra-host migrated. Alternatively, the mask could be freed in sev_migrate_from() when "converting" the source VM, but that gets annoying because ideally KVM would nullify the mask to guard against UA…

In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Do cache maintenance on the source VM during intra-host migration Manually perform cache maintenance on the source VM during intra-host migration to ensure no stale data is left in CPU caches after the VM is destroyed. Because the source VM is "converted" to a non-SEV VM, KVM's memory reclaim flows won't trigger cache maintenance, e.g. when all guest memory is reclaimed in response to detaching from the mmu_notifier. Note, relying on …

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Don't WARN on an unknown VM ioctl in protected mode kvm_pkvm_ioctl_allowed() WARNs when kvm_get_cap_for_kvm_ioctl() doesn't find the ioctl number in vm_ioctl_caps[], and kvm_arch_vm_ioctl() calls it for every number the generic code doesn't handle, so ioctl(vm_fd, 0xdeadbeef) from userspace taints a pKVM host and panics it under panic_on_warn. The lookup is fed userspace input: return false, and userspace gets the -EINVAL kvm_arch_vm_…

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Fix AArch32 DBGBXVR<n> handling The consolidation of the breakpoint and watchpoint register accessors switched DBGBXVR<n> from trap_bvr() to trap_dbg_wb_reg(). The latter selects backing storage with demux_wb_reg(), which only handles Op2 values 4 through 7. Since DBGBXVR<n> uses Op2 1, an AArch32 guest access hits KVM_BUG_ON() and marks the VM dead. DBGBXVR<n> aliases DBGBVR<n>_EL1[63:32], and its AA32(HI) descriptor already selects…

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Fix spurious warning for benign stage 2 teardown race kvmtool was used to establish an L1 guest with 8 CPUs and 8 GiB of RAM, an L2 guest with 4 CPUs and 4 GiB of RAM and an L3 guest with 2 CPUs and 2 GiB of RAM, all of which was then exited. Under memory pressure in the L0 host warnings were observed due to migration triggered by compaction: WARNING: arch/arm64/kvm/mmu.c:336 at __unmap_stage2_range+0x64/0x80, CPU#5: kcompactd0/66 …

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: nv: Fix null ptr deref on nested wp/unmap, teardown race Commit 7270cc9157f4 ("KVM: arm64: nv: Handle VNCR_EL2 invalidation from MMU notifiers") introduced VNCR_EL2 invalidation in both kvm_nested_s2_unmap() and kvm_nested_s2_wp(). However at the point of this being performed concurrent stage 2 teardown of a nested guest can cause kvm->arch.mmu.pgt to be set to NULL. This happens in kvm_flush_shadow_all() -> kvm_arch_flush_shadow_al…

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Transfer the hyp stack pages out of the host stage-2 fix_host_ownership() walks only the linear-map alias of each memblock region, and the per-CPU hyp stack, mapped in the private VA range for its guard page, has none. Walk each stack's VA range with the same walker.

In the Linux kernel, the following vulnerability has been resolved: RISC-V: KVM: Serialize IMSIC attributes with vCPU migration KVM device ioctls are not serialized against KVM_RUN. As a result, kvm_riscv_aia_imsic_rw_attr() can snapshot the physical CPU and HGEI of an IMSIC VS-file before a concurrent vCPU migration releases it. The HGEI can then be allocated to another vCPU before imsic_vsfile_rw() uses the stale tuple. A GET or SET attribute may consequently access the new owner's interrupt file. Serialize t…

In the Linux kernel, the following vulnerability has been resolved: RISC-V: KVM: Synchronize hrtimer callback during teardown The non-Sstc hrtimer callback clears next_set before its final uses of the enclosing vCPU. If teardown observes next_set as false while the callback is still running, kvm_riscv_vcpu_timer_cancel() skips hrtimer_cancel() and kvm_destroy_vcpus() can free the vCPU before the callback enters kvm_riscv_vcpu_set_interrupt(). A guest can arm the timer with SBI TIME and request shutdown with SBI…

In the Linux kernel, the following vulnerability has been resolved: sched_ext: Derive SCX_RQ_IN_WAKEUP from the core enqueue flags schedule_deferred_locked() skips scheduling a deferred action while SCX_RQ_IN_WAKEUP is set and relies on the task_woken_scx() call that follows a wakeup enqueue to run it. enqueue_task_scx() sets the flag from the merged enqueue flags, which include the flags stashed for a remote activation. move_remote_task_to_local_dsq() thus sets SCX_RQ_IN_WAKEUP on the destination rq when the mov…

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_conn: fix CIS hold ownership on reuse Commit 69997d50ec57 ("Bluetooth: ISO: handle bound CIS cleanup via hci_conn") made hci_bind_cis() and hci_connect_cis() return a connection with one hold for the ISO layer. hci_bind_cis() currently takes that hold only after configuring a CIS, so its BT_CONNECTED and matching BT_BOUND paths return a bare lookup result. Its configuration failure path can likewise call hci_conn_drop() before ta…

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sock: validate event length before filtering is_filtered_packet() reads the event code from skb->data[0] without first checking that the skb is nonempty. When an opcode filter is configured, it also reads the command opcode at offsets 3 or 4 without checking that a Command Complete or Command Status event is long enough. hci_send_to_sock() invokes the filter before hci_event_packet() validates the event header. A malformed event s…

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sock: reject out-of-range OCF values The raw HCI socket security filter has 128 OCF bits per supported OGF, but masks the 10-bit OCF with 127 before looking up the command. An unprivileged socket can therefore submit a reserved OCF that aliases an allowlisted command modulo 128. A conforming controller should reject reserved opcodes. Nevertheless, the security decision must apply to the opcode that will actually be sent, especiall…

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: balance the parent hold in hci_bind_bis() hci_conn_link() takes a lifetime reference to its parent with hci_conn_get(), but only takes an operational hold on the child. hci_conn_unlink() later balances both a hold and a reference on the parent. The SCO and CIS paths pass a parent acquired from a connect helper, so it already has a hold. For an additional BIS, hci_bind_bis() obtains the parent from hci_conn_hash_lookup_big(), whic…

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: release unused CIS holds after channel attach hci_bind_cis() and hci_connect_cis() return one hci_conn hold for the ISO layer. A new channel association consumes that hold, which is eventually released by iso_conn_free(). There are two cases where iso_chan_add() does not create an association: it returns success when the socket is already attached to the same iso_conn, and it returns -EBUSY when another socket is attached. The …

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: validate frame length before control and FCS access l2cap_data_rcv() unpacks either a two-byte or four-byte control field without first ensuring that it is present. A short ERTM or streaming-mode frame can therefore cause an out-of-bounds read. There is a second short-frame case when CRC16 is enabled. After the control field is pulled, l2cap_check_fcs() subtracts two from skb->len without checking it. If fewer than two bytes re…