Explore. Understand.
Stay ahead.
A clearer way to explore known software vulnerabilities. Search CVE records, review severity and CVSS scores, and keep track of the issues that matter to you.
Search the vulnerability database
Find a CVE by ID, keyword, severity or CVSS score.
Latest vulnerability records
matching records · page 800 of 2120
In the Linux kernel, the following vulnerability has been resolved: dmaengine: xilinx_dma: Fix channel idle state management in AXIDMA and MCDMA interrupt handlers Fix a race condition in AXIDMA and MCDMA irq handlers where the channel could be incorrectly marked as idle and attempt spurious transfers when descriptors are still being processed. The issue occurs when: 1. Multiple descriptors are queued and active. 2. An interrupt fires after completing some descriptors. 3. xilinx_dma_complete_descriptor() moves c…
In the Linux kernel, the following vulnerability has been resolved: dmaengine: zynqmp_dma: fix race between runtime PM and device removal In zynqmp_dma_remove(), runtime PM was disabled only after checking state and doing a manual suspend. This can race with runtime PM in the remove/unbind (rmmod) path. Disable runtime PM first, then suspend only if the device is not already suspended. To prevent any further runtime PM transitions.
In the Linux kernel, the following vulnerability has been resolved: dmaengine: xilinx_dma: Fix CPU stall in xilinx_dma_poll_timeout Currently when calling xilinx_dma_poll_timeout with delay_us=0 and a condition that is never fulfilled, the CPU busy-waits for prolonged time and the timeout triggers only with a massive delay causing a CPU stall. This happens due to a huge underestimation of wall clock time in poll_timeout_us_atomic. Commit 7349a69cf312 ("iopoll: Do not use timekeeping in read_poll_timeout_atomic()…
In the Linux kernel, the following vulnerability has been resolved: csky: Fix a4/a5 restoration in syscall trace path The syscall trace path reloads syscall arguments from pt_regs before calling the syscall handler. On C-SKY ABIv2, the 5th and 6th syscall arguments are prepared as stack arguments before invoking syscallid. The current code adjusts sp before loading LSAVE_A4 and LSAVE_A5. Since those offsets are relative to the original pt_regs base, loading them after changing sp fetches the wrong slots. As a re…
In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: debug: fix off by on in rtw89_ppdu_str() This > comparison should be >= to avoid an out of bounds access.
In the Linux kernel, the following vulnerability has been resolved: platform/chrome: sensorhub: Fix memory overread in ring handler `max_response` and `sensor_num` are read from different EC commands: - `max_response` is from cros_ec_get_proto_info(). ec_dev->max_response = info->max_response_packet_size - sizeof(struct ec_host_response); - `sensor_num` is from cros_ec_get_sensor_count(). sensor_num = cros_ec_get_sensor_count(ec); With a malfunctioning EC firmware, i…
In the Linux kernel, the following vulnerability has been resolved: uprobes/x86: Move optimized uprobe from nop5 to nop10 Andrii reported an issue with optimized uprobes [1] that can clobber redzone area with call instruction storing return address on stack where user code may keep temporary data without adjusting rsp. Fixing this by moving the optimized uprobes on top of 10-bytes nop instruction, so we can squeeze another instruction to escape the redzone area before doing the call, like: lea -0x80(%rsp), %r…
In the Linux kernel, the following vulnerability has been resolved: hwrng: core - fix rng list on registration error hwrng_register(rng) does the following: 1. Checks if rng has name and read methods set 2. Checks if the name already exists 3. Adds rng to global rng_list 4. May try to set rng to current_rng If step 4 fails, it returns an error. However, it does not remove the rng from rng_list, causing a dangling reference which can result in use-after-free if the caller frees rng, since registration failed. A…
In the Linux kernel, the following vulnerability has been resolved: crypto: qat - cancel work on re-enable SR-IOV timeout The QAT reset worker queues SR-IOV reenable work using a work_struct and completion embedded in an on-stack adf_sriov_dev_data. If the completion wait times out, the reset worker can return while device_sriov_wq still holds or executes the stack-backed work item. Cancel the work on the device_sriov_wq on timeout before the stack frame unwinds.
In the Linux kernel, the following vulnerability has been resolved: crypto: qat - clear AES key schedule from stack qat_alg_xts_reverse_key() expands the forward XTS AES key on the stack. That schedule contains key material and can remain in the stack frame. Clear the temporary crypto_aes_ctx with memzero_explicit() after the copy.
In the Linux kernel, the following vulnerability has been resolved: crypto: atmel-ecc - reject hardware ECDH without a public key The hardware ECDH path in atmel_ecdh_compute_shared_secret() uses the private key stored in the device. However, the public key is cached only after atmel_ecdh_set_secret() successfully generated that private key for the current tfm. atmel_ecdh_generate_public_key() already rejects requests when no public key is cached. Add the same check to atmel_ecdh_compute_shared_secret() to preve…
In the Linux kernel, the following vulnerability has been resolved: crypto: atmel-sha204a - fix heap info leak on I2C transfer failure The nonblocking RNG path allocates a work_data structure to track the state of an in-flight asynchronous I2C request. This pointer is stored in rng->priv and later consumed by the read path once the transaction completes. If the underlying I2C transfer fails, the completion callback is invoked with a non-zero status. In this case, the allocated work_data is not usable for produci…
In the Linux kernel, the following vulnerability has been resolved: crypto: sa2ul - stop probe if context pool creation fails sa_ul_probe() calls sa_init_mem() to create the DMA pool used for security context buffers, but ignores its return value. If pool creation fails, probe still continues with DMA setup, algorithm registration and child population even though later request setup depends on that pool. Stop probing when sa_init_mem() fails, and route that failure to the PM cleanup path without attempting to de…
In the Linux kernel, the following vulnerability has been resolved: hwrng: xilinx-trng - propagate timeout before any data is read xtrng_readblock32() polls for 16-byte chunks but returns the number of bytes read even when the first poll times out. Its caller then treats a zero return as a short successful read, and partial reads for full 32-byte blocks can make the tail copy use a fixed block offset rather than the amount already produced. Return the poll error when no data has been read, preserve partial posit…
In the Linux kernel, the following vulnerability has been resolved: crypto: rk3288 - fail ahash requests on HASH idle timeout rk_hash_run() waits for RK_CRYPTO_HASH_STS to become idle after the final DMA transfer, but ignores the poll result. If the hash engine never becomes idle, the driver still reads the digest registers and finalizes the request with the previous success value. Store the poll result and finalize the request with the timeout error before reading the digest registers.
In the Linux kernel, the following vulnerability has been resolved: crypto: keembay - Fix AEAD unregister count in error path register_aes_algs() registers the AEAD algorithms before registering the skcipher algorithms. If skcipher registration fails, the function unwinds the earlier AEAD registration with crypto_engine_unregister_aeads(), but it passes ARRAY_SIZE(algs), which is the skcipher table size. Use ARRAY_SIZE(algs_aead) for the AEAD unwind path so the unregister helper iterates over the same table tha…
In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Add refcounting to user ring MRs Prevent userspace from deregistering the MRs that back QP/CQ/SRQ rings by bumping the MR's refcount upon association.
In the Linux kernel, the following vulnerability has been resolved: RDMA/bng_re: return a timeout when firmware responses stall __wait_for_resp() documents that it returns a non-zero error when a firmware command does not complete, and bng_re_rcfw_send_message() already marks the firmware as stalled when the helper returns -ENODEV. However, the helper ignores wait_event_timeout() expiry. If the response slot remains in use after the timeout and after the polled CREQ service attempt, the loop starts another full…
In the Linux kernel, the following vulnerability has been resolved: nvme-apple: Use acquire/release for queue enabled state apple_nvme_init_queue() initializes queue state and then marks the queue enabled. The interrupt and request paths check enabled before using that queue state. The old wmb() after WRITE_ONCE(enabled, true) does not publish the earlier initialization before enabled becomes visible. Use a release store when enabling the queue and acquire loads when testing it. Although the shutdown-side enabl…
In the Linux kernel, the following vulnerability has been resolved: nvmet-rdma: fix response resource leak on queue teardown When an nvme target with rdma transport is removed while I/Os are in flight, a response can be posted but its send completion is never delivered before the connection is torn down. As a result nvmet_rdma_send_done() and nvmet_rdma_release_rsp() are never called for the response, and this leaks the allocated RDMA read/write context and request SGLs. These leaks are recreated by running blkt…
In the Linux kernel, the following vulnerability has been resolved: cgroup/cpuset: Make nr_deadline_tasks an atomic_t The nr_deadline_tasks variable in the cpuset structure was introduced by commit 6c24849f5515 ("sched/cpuset: Keep track of SCHED_DEADLINE task in cpusets"). It is reported by sashiko [1] that nr_deadline_tasks can currently be modified by inc_dl_tasks_cs() under rq->lock and by cpuset_attach() under cpuset_mutex. So if both updates happen simultaneously, the nr_deadline_tasks variable can be corru…
In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211_hwsim: avoid NULL skb in stop queue drain mac80211_hwsim_stop() drops any frames left in data->pending. The loop currently checks skb_queue_empty() and then dequeues separately. That split is racy with TX status handling, which can remove a pending frame under the queue lock. If the last entry is removed after the empty check, skb_dequeue() returns NULL and the stop path passes that NULL skb to ieee80211_free_txskb(). Use skb_deq…
In the Linux kernel, the following vulnerability has been resolved: bpf: Reject MEM_ALLOC BTF accesses past object bounds BTF struct walks relax the struct-size check for accesses through a trailing flexible array. That is valid for ordinary BTF type walking, but PTR_TO_BTF_ID | MEM_ALLOC values point to objects allocated with the static BTF type size. When walking a MEM_ALLOC object, reject the access before applying the flexible-array relaxation if the access range extends past the struct size. Apply the same …
In the Linux kernel, the following vulnerability has been resolved: s390/bpf: Replace ly instruction with llgf cpu_nr is a 32 bit value and BPF_REG_0 is a 64 bit register, when ly loads the cpu_nr into BPF_REG_0 it does not zero the upper bits, but llgf does.
In the Linux kernel, the following vulnerability has been resolved: time/namespace: Validate nanosecond field in proc_timens_set_offset() The function validates tv_sec to be within [-KTIME_SEC_MAX, KTIME_SEC_MAX] but never validates that tv_nsec is within the valid range of [0, NSEC_PER_SEC-1] before using it in timespec64_add(). timespec64_add() expects both timespec64 structures to have normalized values with tv_nsec in the range [0, 999999999]. If off->val.tv_nsec contains invalid values (negative or >= NSEC_…